Sieve 2

The Filtreco with built-in mechanical dirt filter is the first step in the filtration process, namely filtration! Suitable for initial coarse particles such as feces, leaves and food residues.

The Filtreco Sieve can be connected directly to the skimmer and bottom drain. It is very important for the correct recycling of the entire pond system. The water is fed through pipes through the skimmer and bottom drain. Ideal for connection with a 110 mm pipe. We also recommend that you connect the sludge flange directly to the sewer. If this is not possible, you can also use a smaller sump with a submersible pump so that the dirt can then be drained.
A sieve containing holes with a size of 200 to 300 microns. This is more than enough to capture the main dirt and still leave enough food for the bacteria to function biologically!

Dimensions: 565 x 495 x 759mm

Max. flow: 30,000L/H

Sieve density: 300 microns and the last 50mm 200 microns

Sieve size: 445 x 400mm

Inlet: 2 x 110mm

Pump outlet: 2x external thread 2"

Waste outlet: 1x external thread 1.5"

Including lid

The upper edge of the filter should be installed about 4 cm above the water level in the pond.